Processing
Brushing and HL finish
HL (hairline) and No.4 brushed finishes on 304 / 316L / 430 sheet, with grain direction controlled.
Range and tolerance
| Item | Value |
|---|---|
| Finish | HL / No.4 |
| Ra (HL) | 0.5–1.5 μm |
| Thickness | 0.3–3 mm |
| Grain | parallel to length (stated on order) |
Typical use
- Elevator doors and cabin panels
- Appliance front panels
- Balustrades and wall trim
Grain direction must be stated. Two panels with opposite grain read as two different colours under light — this is the most common complaint on brushed sheet.
Need a quote for this operation?
Send the size, quantity and destination port — we reply with FOB / CIF within 24 hours.