Stainless Steel
Custom Cutting and Fabrication
Laser cutting, waterjet, CNC bending, punching and welding — made to drawing, from 0.3 mm sheet to 80 mm plate.
0.3–80 mmThickness
≤ 3000 mmWidth
Available Specification
| Grades | Thickness | Width / Diameter | Standard |
|---|---|---|---|
| 304 · 316L · 430 · 2205 | 0.3–80 mm | ≤ 3000 mm | ASTM A240 / EN 10088-2 |
Ranges shown are standard availability; non-standard sizes can be made to order. Thickness is nominal — tolerance judged to ASTM A480 / EN 10088-2.
Typical Applications
- Brackets, supports and machine guards
- Tank nozzles, baffles and flanges
- Decorative screens and perforated panels
Delivery and Inspection
- Laser ±0.1 mm, waterjet ±0.2 mm, no heat-affected zone on waterjet
- Deburred, edge-prepped and passivated on request
- We quote from your DXF/DWG — send the drawing with the enquiry
Need a Quote or Technical Support?
Send the grade, size, quantity and destination port — we reply with FOB / CIF within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Robotics — outer covers, mounting plates, guard brackets
- Automation — frame panels, rail mounting plates, fixture locating plates
- Kitchen and appliances — pierced panels, decorative parts
- Architecture — perforated screens, signage, shaped trims
Selection FAQ
- What tolerance does laser cutting hold?
- ±0.1 mm as standard; tighter on thin precision parts, looser on thick plate because of heat effects and kerf taper — assessed against your drawing.
- Why is stainless steel common for robot housings?
- It depends on the environment: cleanroom, food, medical and outdoor applications often use 304/316L because it withstands cleaning agents and moisture. For ordinary industrial settings, powder-coated cold rolled steel is more economical.
- Can you cut directly from drawings?
- Yes — DXF / DWG / PDF. Please state material, thickness, quantity and surface requirement when enquiring.
Not sure which grade fits? Use the grade selector