Can No.1 finish be used as-is?

Yes, but it is grey and rougher. Visible structural parts are usually pickled or brushed afterwards.

Hot rolled or cold rolled coil?

Thicker material (generally above 3 mm), strength first, appearance secondary — hot rolled. Thin gauge, tight tolerance, good surface — cold rolled.

Hot Rolled Stainless Coil

316L Hot Rolled Stainless Coil No.1

Name: Stainless Steel ss hr 316l no1
Brand: UGB Steel

316L Hot Rolled Stainless Coil No.1 · Grade 316L · Thickness 3–12 mm · Width ≤ 1500 mm · Surface No.1

Get a quote View category

Specifications

Product code	ss-hr-316l-no1
Grade	316L
Thickness	3.00 – 12.00 mm
Width	≤ 1500.0 mm
Surface	No.1
Form	Coil
Standard	ASTM A240 / EN 10088-2
MOQ	10 t

Lead time20–30 days

DocumentsEN 10204 3.1

ProcessingDecoil · slit · cut

QuoteWithin 24 h

Available grades: 316L

Request a quote sales@ugbsteel.com

Available specifications and processing

Surface: 2B · BA · No.1 · No.4 · HL · 8K · embossed on request
Processing: slitting · cut-to-length · brushing · PVC film · laser / waterjet · cut rings
Standards: ASTM A240 · EN 10088-2 · JIS G4304/4305 · GB/T 3280
Packing: wooden or steel pallet, edge protector, PVC film on request
Documents: EN 10204 3.1 mill certificate · certificate of origin · third-party inspection report

Standard ranges above; the contract and technical agreement prevail.

Typical applications

Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.

Chemical plant — tank shells, reactor jackets, pipe supports
Water and environment — waste water basin liners, desulphurisation towers, desalination lines
Industrial structures — walkways, silos, conveyor frames
Power — flue ducts, heat recovery units
Further processing — feedstock for cold rolling, or decoiled into plate

Selection FAQ

Can No.1 finish be used as-is?: Yes, but it is grey and rougher. Visible structural parts are usually pickled or brushed afterwards.
Hot rolled or cold rolled coil?: Thicker material (generally above 3 mm), strength first, appearance secondary — hot rolled. Thin gauge, tight tolerance, good surface — cold rolled.