可供规格
| 牌号 | 厚度 | 宽度 / 直径 | 标准 |
|---|---|---|---|
| 304 · 316L · 430 · 201 | 0.3–3 mm | ≤ 1500 mm | ASTM A240 / EN 10088-2 |
所示范围为常规可供规格；非标尺寸可定制。厚度为公称厚度 — 公差按 ASTM A480 / EN 10088-2 判定。
典型应用
- 家电与厨房设备
- 电梯与室内装饰
- 冲压与深拉延
交付与检验
- 2B：Ra 0.2–0.5 μm；BA：Ra 0.05–0.2 μm
- 经平整轧制以保证板形，适合直接贴膜
- 表面等级按 ASTM A480 判定 — 色差与划伤争议有据可依
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Kitchen equipment — sinks, hob panels, range hood shells, commercial fridge liners
- Home appliances — washing machine drums and panels, microwave cavities, steriliser racks
- Architecture — elevator door frames and car panels, façade trims, balustrades, handles
- Food and pharma — filling line tables, tank liners, cleanroom wall panels
- Consumer goods — vacuum flasks, cookware, cutlery, bathroom fittings
Selection FAQ
- Should a kitchen sink be 304 or 316 stainless?
- 304 is enough for domestic use. For coastal areas, or where salt and detergent sit on the surface, 316L lowers the pitting risk.
- What is the difference between 2B and BA finish?
- 2B is cold rolled, annealed, pickled and skin-passed — a matte silver-grey. BA is bright annealed: more reflective, closer to mirror, slightly higher cost.
- Does stainless steel rust?
- "Stainless" is relative to carbon steel. Chlorides (salt, bleach) and scratched surfaces are the main triggers; in coastal or chemical environments upgrade 304 to 316L.
Not sure which grade fits? Use the grade selector